EasyTrax Setup and Operation
11
5.
Position a magnet on the left and right edges of the press sheet to hold it in place on the
table.
6.
Move the read head across the color bar without changing the up/down position (vertical
position). Remove the paper holding magnets and slide the paper stop alignment tab on the
far end of the sheet left or right until the final patch lines up under the reticule.
7.
Return the read head to home position and verify that the color bar is aligned with the
reticule during the return trip.
Reticule
not properly
positioned over the final
patch on the sheet
Reticule
properly
positioned over the final
patch on the sheet
Alignment tab
Correct
Incorrect