X-Rite DensiEye 100, Quick Start Manual

Page: 17 / 130

Quick Start Guide Quick Start Guide
E N G L I S H
13
X-Rite
®
DensiEye
™
Quick Start Guide
EN
Message box
Messages as “White measurement done“ and error messages will be displayed in the in the message box, within the output field.
Pass/Fail Indicator
Pass/Fail is indicated by a green and red LED on top of the measuring head next to the display for the functions Density, Dot Gain and Gray balance.
Pass/Fail information on the display
If the measured value is within tolerance a check mark behind the value is displayed.
If the measured value is out of tolerance an “arrow up” or “arrow down” will be displayed.
11. Function selection
• The required function is pre-selected in the menu using the Up/Down buttons
• Pressing the Enter button in the main menu opens the display window for the function
• Pressing the Enter button in a popup menu activates the selected setting
12. Symbol selection
• The required symbol is pre-selected using the Up/Down buttons
•
Depending on the functionality of the symbols, as described in the previous chapters, the Enter button needs to be pressed or a
measurement initiated