Rev.081022
Page
12
of
19
FUS-20852000-0006
Do not wrap the rope around the object and hook onto the rope itself. This can damage the object being
pulled, and kink or fray the rope.
8.
Attachment
point must be centered in loop of hook and the hook’s safety clasp must be fully closed.
(See image below.)
9.
Do not use a recovery strap while winching. They
are designed to stretch and can suddenly whip
back towards the operator during operation.
10. Place a heavy rag or carpet (sold separately)
over the rope span, 6 feet from the hook to help
absorb the force released if the rope breaks.
11. Re-engage the clutch by moving the clutch
handle to the engaged position (see image
below).
12. Attach the pendant controller to the
socket on the control pack assembly
(see image to right). Lift Socket
cover on the side of Control Pack to
attach remote cord.
13. Operate the pendant controls briefly
to ensure they work properly. If
operation is reversed, the power
cables may be connected
backwards. Correct any such issue
before use.
⚠
WARNING
Do not allow anyone to stand near the rope or in line with the rope behind the winch while it is under power. If
the rope should slip or break, it can suddenly whip back towards the winch, causing a hazard for anyone in the
area. Stand far to the side while winching.
Summary of Contents for XP-12
Page 1: ...SAVE THESE INSTRUCTIONS...
