Page 18
Task Setup
From either the ‘Run Tool’ or ‘Setup’ screens, tapping the task name will bring up the ‘Task Setup’
screen shown below:
All 12 tasks are displayed here and tapping any one will switch to that task.
Renaming and Importing Tasks
From the ‘Task Setup’ menu, pressing and holding on a task name will display the following screen:
Tapping the ‘Rename’ button will allow the user to enter a customized name with the on-screen keypad.
When a USB drive is inserted, the ‘Import’ button will be active, allowing the user to select a task file to
import from the USB drive.
The task settings from the imported file will completely over-write the
task shown at the top of this screen, there is no partial import.
