x-IMU3 User Manual v0.11
April 6, 2022
11.1.30
External antennae enabled
Description:
Enables (true) or disables (false) the external antennae.
An antennae must be
connected to the U.FL connector if the external antennae is enabled. The internal
antennae will be used if the external antennae is disabled.
JSON key:
"externalAntennaeEnabled"
JSON value type:
true or false
Default value:
false
11.1.31
Wi-Fi region
Description:
Configures the region for Wi-Fi operation. The device will operate according to the
regulations of the selected region. See Section 11.1.34 for a list of channels available
in each region. The possible values are listed in Table 31.
Value
Region
1
United States (US)
2
Europe (EU)
3
Japan (JP)
Table 31: Wi-Fi regions
JSON key:
"wiFiRegion"
JSON value type:
number
Default value:
2
11.1.32
Wi-Fi MAC address (read-only)
Description:
Wi-Fi Media Access Control (MAC) address.
JSON key:
"wiFiMacAddress"
JSON value type:
string
Default value:
0
11.1.33
Wi-Fi IP address (read-only)
Description:
Current IP address of the device. A value of 0.0.0.0 indicates that the device does
not yet have an IP address.
JSON key:
"wiFiIPAddress"
JSON value type:
string
Default value:
0
11.1.34
Wi-Fi client SSID
Description:
Configures the Service Set Identifier (SSID) in Wi-Fi client mode. This is the name of
the router that the device will connect to. The SSID may be up to 31 characters long.
JSON key:
"wiFiClientSsid"
JSON value type:
string
Default value:
“x-IMU3 Network”
39
