OWNERS MANUAL
05
ASSEMBLY INSTRUCTIONS
Pullout the ball pin to expand the main frame.
Once expanded insert ball pin back in.
Install the left and right pedal onto the corresponding
axle. By screwing on the thread of the pedal to the
axle. Use the spanner provided to tighten each
pedal. Each pedal is marked with L & R to help you
know which pedal goes on which side. Be careful
not to attach them on the wrong way round as it may
damage the product and could lead to injury.
1.
4.
Loosen the screws on the front & rear stabilizers.
Insert the stabilizers into the corresponding grooves
on the main frame. Tighten the bolts using the
spanner provided.
2.
Using the Allen key, loosen the screws with gaskets
on the handlebar. Place it on to the corresponding
groove on the main frame. Tighten screws with Allen
key to secure in place. Connect the monitor to the
handle bar by screwing it onto the metal plate on the
handle bar using the end of the spanner provided.
3.
