6
Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
CONNECTION
7. Connection
Attention
Ensure good quality cabling is used throughout your system, with no electrical interference,
bends, twists, kinks, or other issues that may interfere with signal transmission, including the use of patch
panels or wall outlets. Cable connectors should also be in good condition and correctly terminated to
required standards, with straight cable runs used where possible and plugs securely connected to ports
without straining port enclosures.
The presence of any of these factors in your system can jeopardize successful signal distribution and
should be eliminated wherever possible.
Connect an HDMI source (such as Blu-ray, Satellite/Cable receiver, media server, computer etc.) to any
NHD-IP-TX transmitters to be used with a good quality HDMI cable, ensuring firm port connection.
Connect the computer to be used for KVM to the transmitter with a good quality USB cable.
Connect RS232 from the receiver to the display.
Connect an HDMI display to the receiver with a good quality HDMI cable.
Connect USB control devices (keyboard, mouse) to the USB of the receiver.
Connect good quality, well terminated CAT5e/6 cables of no more than 100m/328ft between the transmitter (TX),
receiver (RX) and Controller (CTL) - if in use.
2
3
4
5
6
1
The
quality
of
termination
for
every
RJ45
is
essential. Poor terminations leads to intermittent
performance and longer install times.
Cat5e/6 Cable
Performance Guide
NHD-IP-TX & NHD-IP-RX
0ft
328ft
32ft
65ft
98ft 131ft 164ft 197ft 230ft 262ft 295ft
0m
100m
10m
20m 30m
40m 50m
60m 70m
80m 90m
1
2
Key
cat 5
e
/6
100m/328ft
hdmi
USB
RS232
Blu Ray
KVM
Controller
Tx
rx
Tx
rx
3
3
4
4
5
5
6
6
6
7
7
8
