Wyrestorm MX-0808-HDBT Instruction Manual Download Page 4

Page: 4 / 24

Technical Support: [email protected] US: +866 677 0053 EU: +44 (0) 1793 230 343

CKA

E CONTE

NTS, S

PE
CI

ON
S, FR

ONT P

AN
E

L, R

EAR P

AN
E

• MX-0808-HDBT main unit

• Instruction manual

• CD including PC software and copy of instruction manual

• Mounting brackets

• Stylus (for touch screen)

• 1 x 100-240v AC power cable/adapter

• 1 x USB to RS232 cable

• 1 x RS232 to RS485 converter

• 1 x IR RX Receiver (larger sensor for HD display)

• 8 x IR TX Emitters (small sensor for Input source)

• 1 x MX-0808-HDBT remote control (incl. battery)

4. Package Contents

Operating Temperature
Range

-5 to +35°C (-41 to +95°C)

Operating Humidity Range

5 to 90 % RH
(no condensation)

Video Amplifier Bandwidth

2.25Gbps

Input Video Signal

0.5-1.0 volts p-p

Input DDC Signal

5 volts p-p (TTL)

Maximum Single Link Range

1080p Deep Colour

Transmission distance

1080p signal up to
100m / 328ft (under perfect
transmission conditions. See
FAQ on p.19)

Video Format Supported

VESA: 640x480, 800x600,
1024x768, 1280x1024,
1600x1200, 1920x1200
DTV/HDTV:
480i/576i/480p/576p/720p/
1080i/1080p

Output Video

High Speed HDMI
(or ‘category 2’) See FAQ on
p.19 for details.

Power Consumption

35 Watts (max.)

Power Supply

100-240V AC

Dimensions

440mm / 17.3” (W)
140mm / 5.5” (H)
288mm / 11.3” (D)

Weight

9.7 Kg / 21.41lbs

5. Specifications

6. Front Panel

Touch panel

Remote control IR sensor

Power on/off switch

7. Rear Panel

IR extension port - for control when the Matrix is out of view,

such as in a rack or enclosed shelving system

DIP switch

RS485 port - alternative control of the matrix via RS485 cable

LAN port - for controlling the Matrix remotely over an IP
network

IR TX Emitter ports - numbered 1-8 to correspond to inputs
1-8

RS232 port - alternative control of the matrix via RS232 cable

Power cable input

HDMI inputs - numbered 1-8

IR RX Receiver ports - numbered 1-8 to connect to:

HDBaseT Single Cat5e/6/7 Display Receiver

Part Number

RX-100IR-HDBT

In-wall HDBaseT Single Cat5e/6/7 Display Receiver

Part Number

RX-100IR-HDBT-IW

Ethernet port - to connect to display receiver:

HDBaseT Single Cat5e/6/7 Display Receiver

Part Number

RX-100IR-HDBT

In-wall HDBaseT Single Cat5e/6/7 Display Receiver

Part Number

RX-100IR-HDBT-IW

RS232 port to connect to display receiver:

HDBaseT Single Cat5e/6/7 Display Receiver

Part Number

RX-100IR-HDBT

In-wall HDBaseT Single Cat5e/6/7 Display Receiver

Part Number

RX-100IR-HDBT-IW

Link status LED - lit when UTP connection established

UTP output - to connect to display receiver

HDBaseT Single Cat5e/6/7 Display Receiver

Part Number

RX-100IR-HDBT

In-wall HDBaseT Single Cat5e/6/7 Display Receiver

Part Number

RX-100IR-HDBT-IW

ISP port for firmware updates

Summary of Contents for MX-0808-HDBT

























Search results

Summary of Contents for MX-0808-HDBT

Reviews:

Related manuals for MX-0808-HDBT

Brands by name

Popular brands

Wyrestorm MX-0808-HDBT, Instruction Manual

Search results

Summary of Contents for MX-0808-HDBT

Reviews:

Related manuals for MX-0808-HDBT

Brands by name

Popular brands