background image

 
MAINTENANCE   
 
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this 
unit.  
  
 
PRODUCT SERVICE  
 

1)

 

Damage requiring service: The unit should be serviced by qualified service personnel if:  

a)

 

The DC power supply cord or AC adaptor have been damaged;  

b)

 

Objects or liquids have gotten into the unit;  

c)

 

The unit has been exposed to water;  

d)

 

The unit does not operate normally or exhibits a marked change in performance;  

e)

 

The unit has been dropped or the cabinet has been damaged.  

2)

 

Servicing Personnel: Do not attempt to service the unit beyond that described in these 
operating instructions. Refer all other servicing to authorized servicing personnel.  

3)

 

Replacement parts: When parts need replacing make sure the servicer uses parts specified 
by the manufacturer or parts that have the same characteristics as the original parts. 
Unauthorized substitutes may result in fire, electric shock, or other hazards.  

4)

 

Safety check: After repairs or service, ask the servicer to perform safety checks to 
confirm that the unit is in proper working condition.  

 
  
WARRANTY  
 
If your product does not work properly because of a defect in materials or workmanship, 
Wyrestorm (referred to as “the warrantor”) will, for the length of the period indicated as below, 
(Parts and Labor (2) Year) which starts with the date of original purchase (“Limited Warranty 
period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace 
it with a new or a refurbished product. The decision to repair or replace will be made by the 
warrantor.  
 
During the “Labor” Limited Warranty period there will be no charge for labor.  
During the “Parts” warranty period, there will be no charge for parts. You must mail-in your 
product during the warranty period. This Limited Warranty is extended only to the original 
purchaser and only covers product purchased as new. A purchase receipt or other proof of 
original purchase date is required for Limited Warranty service.  
 
Mail-In Service  
 

Summary of Contents for MAT8T820

























Reviews: