Click OK after assigning the new IP and return to the previous dialog box.
Click
and
. The device can be displayed correctly.
ATTENTION: In this application the assign IP is different from SetIP in COMCTL. SetIP in
COMCTL is used to save the IP address in flash, when the MAT8T820 power is on, it will read
the IP from flash and set it as static IP. Use the Assign IP function when the automatically obtain
IP address fails. This assigned IP address is not saving in flash.
11 IR call back from remote locations to control the HDMI Matrix MAT8T820. You can use the
MAT8T820’s remote through the IR RX of the UTP receiver to change the input channel for the
UTP out of the MAT8T820, just changing this UTP output. This function can be set on or off:
press the output1 button and the output8 button at the same time for about 3 seconds. The LEDs
will display ‘IR ON’ or ‘IR OFF’.
