Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
2
Contents
CONTENTS, INTRODUCTION, FEA
TURES, AND FEA
TURES
• HDBaseT extenders capable of 1080p HD @60Hz and
HD multichannel audio transmissions up to 50m/164ft
under perfect conditions*
• Discrete two-way IR control signal together with HDMI
signal over a single Cat5e/6/7 cable
• Power-over-HDBaseT (PoH) - 12v Mains connected
Transmitters pass unidirectional power along the Cat5e/6
to remotely power display receivers - no additional power
required at display locations. (EX-1UTP-IR-50-POH only)
• Fully supports 3D applications - frame packing/
sequential (Blu-ray) and Interlaced Stereoscopic (satellite/
cable) broadcasts
• Supports 36bit Deep Colour
• HDMI V1.4
• Cable termination follows IEEE-568B standards
• HDCP compliant
• Automatically adjusts feedback, equalisation and
amplification of signal for easy installation.
• LED indication for visual power and HDMI / HDBaseT
video signal status.
* Perfect transmission conditions denote straight cable
runs with no electrical interference, bends, kinks, patch
panels or wall outlets.
1. Introduction
The WyreStorm EX-1UTP-IR-50 and EX-1UTP-IR-
50-POH extender models feature Class B HDBaseT
technology for an even more affordable HDBaseT
extender solution over shorter distances up to
50m/164ft.
Designed for smaller projects that may not require the
feature set of full HDBaseT yet still benefit from the
signal stability and functions offered by this powerful
technology, including distribution of full 1080p HD
video, HD audio and bidirectional IR, with the PoH
model including remote power passed through a single
Cat5e/6 cable from the transmitter to power the display
receiver.
The EX-1UTP-IR-50 and POH Extender models
comprise of a transmitter and receiver to distribute
full, uncompressed HD 1080p video @60Hz, HD
multichannel audio with bidirectional discrete IR control
of source and display from either location over distances
of up to 50m/164ft using a single shielded or unshielded
Cat5e/6 cable.
The EX-1UTP-IR-50-POH features Power-over-HDBaseT
technology, that enables the transmitter to draw 12v
power from a mains supply and pass the current along
the length of a single Cat5e/6 cable along with the video,
audio and control signals to power the receiver - no
power access is necessary at the display location for
ease of installation and connection; meaning no additional
power adaptors required and improved energy efficiency.
Transmitters of both models include EDID management
to manually handle device communication via DIP
switch setting, with Receivers containing cable distance
setting mode to encourage successful transmission if
the distance of the cable run is an issue. Transmitters
and receivers of both models also feature protection
against ESD (electrostatic discharge) to further stabilise
transmission with LED indication on the unit housing
providing clear confirmation of power and signal link
status.
Both models are fully cascadable with distribution
increased by connecting multiple extenders for greater
flexibility, whatever the application.
2. Features
Introduction
Features
Safety Precautions
Packaging Contents
Specification
Typical Application
Troubleshooting
FAQ’s
EDID & Distance Setting
Maintenance
Product Service
Panel Description
i. EX-1UTP-IR-50 Transmitter & Receiver
ii. EX-1UTP-IR-50 - POH Transmitter & Receiver
Connection & Operation
1
2
3
4
5
6
7
8
9
10
11
12
14
13
15
16
17
Mail In Service
Warranty
Warranty Limits and Exclusions
Installation Notes
