Wylie 8220 Boom Operator'S & Parts Manual Download Page 6

2

Be alert when you see the above symbol in the manual.  It warns of a hazard 

which might lead to injury.  It means:  

Attention!  Become alert!  Your safety is 

Involved!

Three (3) words (Danger, Warning, and Caution) are associated with this symbol. 

DANGER – 

Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.  This signal word 

is to be limited to the most extreme situations. 

WARNING – 

Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.  

CAUTION – 

Indicates a hazardous situation, which, if not avoided, may result in minor or moderate injury.  

NOTICE – 

Indicates information considered important, but not hazard-related (e.g., messages relating to property damage). 

SAFETY INSTRUCTIONS - 

Indicates a type of safety sign where specific safety-related instructions or procedures are described. 

Before Use

Do not operate sprayer until this manual has been read and understood!

Thoroughly read and understand all instructions before operating this sprayer.  If you have questions,  

 

 

please contact 

Wylie Manufacturing, 702 E. 40th St., Lubbock, TX  79404, 

(888) 788-7753.

 

 

You can also contact your nearest

 

Wylie Spray Center

.

Place a 

“Slow Moving Vehicle”

 emblem on the rear of the unit prior to driving on open roads.

Always wear safety goggles, chemical resistant apron and rubber gloves when handling chemicals.

Read and understand the chemical manufacturer’s safety guidelines on handling, mixing and application.

During Use

Do not allow anyone to ride on sprayer during operation.  Falling can cause injury.

Ensure the tractor has sufficient weights to prevent tipping when spray tank is full.

Reduce speed when crossing uneven or rough terrain.

Always support the sprayer on parking stands and turn off tractor engine before making adjustments 

 

 

or repairs.

Safety Issues

Safety Precautions

Summary of Contents for 8220 Boom



























Reviews: