Seite 47 von 53 Seiten
4. C
HANGING OF
MINILEVEL NT
AND
LEVELTRONIC NT
TO
R
ADIO
M
ODULE
Existing MINILEVEL NT and LEVELTRONIC NT can be upgraded to a Radio module set
One set consists of the following components:
•
Handle for the instrument with integrated radio module
•
Radio module box
•
Cable set inclusive Y-cable connecting radio module box with LEVELMETER 2000
Article numbers of a complete set (for 2 MINILEVEL NT or LEVELTRONIC NT)
•
for EUROPE
065-005-0350
•
for USA
065-005-0351
Handle bracket
Radio module
handle to be
shifted parallel to
the base
How to install:
1.
Remove existing handle
2.
Remove existing installed batteries, they
will not be used anymore
3.
Mount the new handle bracket to the
base, use the existing holes
4.
Install the new handle by shifting it
horizontally onto the bracket. Please
make sure that the connecting pins make
good contact with the existing socket.
IMPORTANT:
Remove batteries from the radio module
handle during installation!
5.
Fasten the handle to the bracket
with 4 bolts.
IMPORTANT:
By the angular model please make sure
that the handle is not touching the base.
(Distance is about 0.3 mm)
6.
Insert batteries in handle of measuring
instruments (2 x 1,5V Size „C“ Alkaline)
7.
Insert batteries in the radio module box
(2 x 1,5V Size „C“ Alkaline)
8.
Make functional check according to the
procedure described below
The handle must
not touch the base
Instruments
housing and
handle must not
touch, check with
light source
