Page 16 of 18
52396 R00
7. Secure the new strap at the anchor end using the
upper most strap anchor mounting holes.
8. Attach the sling bar.
LIFT STRAP ADJUSTMENT
Over time the lift strap may stretch to a point that
when the lift arm is fully raised the sling bar cannot
be raised completely to the arm. This can be corrected
by moving the strap anchor to either the middle or
lower position. Each position increases the lift strap
upward travel by 4”.
1. Raise the lift arm to its maximum up position.
2. Raise the sling bar. If it does not go all the way to
the arm move the strap anchor as needed.
NOTE: There must be at least 4” of lift strap exposed
between the sling bar and the arm to move the strap
anchor one position. If there is not 4” of lift strap
exposed use the manual lowering until there is before
moving the strap anchor.
E ring
Anchor pin
Anchor screw (2)
Nylon washer (2)
Metal washer (2)
Strap anchor
mounting holes
Upper
Middle
Lower
