Würth ORSY mat FP, Operating Instructions Manual

Page: 19 / 36

19
1 GENERAL
1.1 Introduction
1.1.1 Copyright
© Würth Industrie Service GmbH & Co . KG
This document is copyright protected . The rights established by this, particularly those of translation, reprint,
extraction of illustrations, radio broadcast, reproduction in photomechanical or similar ways and storage
in data processing systems are retained, even in case of use of extracts only . The Würth Industrie Service
GmbH & Co . KG does not provide any declarations or guarantees regarding the content of these operating
instructions and expressly rejects acceptance of any responsibility for defect claims, including for implicit
defect claims .
Furthermore, the Würth Industrie Service GmbH & Co . KG reserves the right to update this publication and
to make changes, without entering into the obligation to inform each person of these changes .
1.1.2 Revisions
The text, images and data correspond to the technical status of the vending machine at the time of printing
these operating instructions . We reserve the right to make changes in the interest of further development .
Index Date Comment Page(s)
00 18/01/2021 Instructions created all
01
02
03
1.1.3 Number of pages, document/complete
This document contains 36 pages . If you have all pages in consecutive order, your document is complete .
1.1.4 Software
Please note that these instructions apply to different vending machine models . Therefore, details may be
described that your vending machine possibly does not include .
This document describes the software version 2 .0 .4 (vending machine control: media module & CAN head) .
Differences can occur if you have installed another versions .
To read out the software version of the vending machine control, please log into the vending machine and
select “Information” in the vending machine menu .
1.1.5 Availability of the instructions
The operating instructions must be available to the user continuously to enable safe use . They must be kept
in an easily reached place in which they can be referred to at any time in the site where the machine is
used .
1.1.6 Scope
This document is for the following machine types:
• M27, M33, M65 Software version V2 .0 .4 and higher
• Satellite modules: S5, S9, S10, S18, S34, S36, S72
This document can also be applied to the satellite module variants without control, which consist exclusi-
vely of sales flaps.