13
5
Lock-on button for On/Off switch
6
On/Off switch
7
Rotational direction switch
8
Handle (insulated gripping surface)
9
Screwdriver bit*
10
Universal bit holder*
* The accessories illustrated or described are not
included as standard delivery.
Tool Specifications
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 83 dB(A); Sound power level 94 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Drilling into metal: a
h
=5.0 m/s
2
, K =1.5 m/s
2
,
Screwdriving: a
h
=3.0 m/s
2
, K =1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product
described under “Tool Specifications” is in conformity with the
following standards or standardization documents:
EN 60745 according to the provisions of the directives
2011/65/EU, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Adolf Würth GmbH & Co.KG, PFW,
Reinhold-Würth-Straße 12-17
74653 Künzelsau, Germany
Künzelsau: 09.09.2013
Changing the Tool
Before any work on the machine itself, pull the
mains plug.
Wear protective gloves when changing the
tool.
The drill chuck can become very hot during longer
work periods.
Keyless Chuck (see figure A)
Hold the rear sleeve
3
of the keyless chuck
1
tight and turn
the front sleeve
2
in rotation direction
, until the tool can be
inserted. Insert the tool.
Rotary drill
BM 10-E
COMPACT
Art. No.
0702 327 X
Rated power input
W
600
Output power
W
360
No-load speed
min
-1
0 – 2600
Rated speed
min
-1
1676
Rated torque
Nm
20
Spindle collar dia.
mm
43
Speed control
Right/left rotation
Max. drilling dia.
– Steel
– Wood
– Aluminium
mm
mm
mm
10
25
10
Chuck clamping range
mm
1 – 10
Weight according to
EPTA-Procedure 01/2003
kg
1.7
Protection class
/
II
The values given apply for nominal voltages [U] of 230/240 V.
T. Klenk
General Manager
A. Kräutle
General Manager
OBJ_BUCH-2051-001.book Page 13 Monday, September 9, 2013 3:31 PM
