Würth 0827 981 501, Translation Of The Original Operating Instructions, Page: 14 / 116

14
Technical Data
PORTABLE WORK LAMP
POWERQUAD M AC/R
Art.
0827 981 501
Batteries
Lithium ion,
14,8
V DC, 27 Wh
Supply voltage power supply unit 220–240 V AC
Frequency power supply unit 50/60 Hz
Rating power 35 W
Luminous flux Luminaire 4.000 lm
Luminous flux Lamp 5.300 lm
Colour temperature 5.000 K
Type of protection/ Impact resistance level Luminaire IP54 / IK08
Type of protection power supply unit IP44
Protection class Luminaire III
Protection class power supply unit II
Cable power supply unit H05RN-F2x1,0 mm
2
black
Cable length 5 m
Protective contact or contour plug Contour plugs CEE 7/17 according to German / Austrian
and Belgian / French standards
Charging temperature range +5 °C ... +30 °C
Dimensions (H x W x D) 320 x 300 x 125 mm
Weight 2.700 g
For Your Safety
Please read and comply with these operating
instructions prior to initial operation of your
device. Keep these operating instructions for
later use or for a subsequent owner.
Warning!
Risk of injury to the eyes
•
Do not look into the lamp when it is switched on.
•
Make sure that no one is blinded.
Only use the charger recommended by the manufacturer
to charge the lamp. Use of a charger that is NOT recom-
mended may cause a fire and destroy the lamp.
Warning!
Prior to first use always read the safety instruc -
tions! Failure to observe the operating instructions and the
safety instructions could result in damage to the appliance
and danger for the operator and other persons.
Specified Conditions of Use
This appliance/product is designed for professional use
in industry and trade. The appliance/product is used as
intended if it is used exclusively for illuminating ordinary
work areas and if the specifications stated in the technical
data are observed. Any other use or use beyond this is not
permitted.
Foreseeable misuse
The appliance must not be used:
•
in areas with harmful gases, oils, acids, radiation, etc.
•
in potentially explosive atmospheres
This lamp complies with all relevant norms and standards
in connection with CE conformity. If the lamp is modified,
compliance with these standards is no longer guaranteed.
GB