18
Note
Dependent on the thickness and quality
of the wood-streel structure, the drilling/
screwing process lasts several seconds.
3
The screwing process is completed as soon as the
set screw-in depth is reached and a ratchet noise
can be heard from the jaw clutch.
▸
Release lever
[1]
.
3
The compressed air cylinder
[16]
guides the
device back into its top starting position.
▸
Only drop in the next screw once the compressed
air cylinder
[16]
has completely retracted and
returned to the initial position.
Note
If for whatever reason screwing is
interrupted, the screw cannot subsequent-
ly be tightened using the device; rather it
must be manually tightened.
Transport and storage
Transport
▸
Tip the device forwards and pull it on the move-
ment castors
[14](Fig. VIII)
.
Storage
▸
Disconnect the device from the power / com
-
pressed air supply.
▸
Store the device horizontally.
Maintenance and cleaning
WARNING!
Danger due to electric current and
compressed air.
¾
Carry out maintenance and cleaning
work on the device only when the
mains plug and compressed air
supply are disconnected.
▸
To ensure safe working always keep the device,
especially the ventilation slots
[8]
clean.
▸
Regularly check the compressed air lines and
connections for leak-tightness.
▸
Regularly clean the guide tube
[17]
, centring
unit
[12]
and guide sleeves
[25]
.
▸
Regularly lubricate the guide tubes and the indi
-
cated locations on the device with maintenance
oil
(Fig. IX)
.
Accessories and spare parts
Description
Art.
Maintenance oil
0893 055 40
Allen key
0715 31 37
Bit AW30, 1/4 ", 70 mm
0614 573 0
Bit AW40, 1/4 ", 70 mm
0614 574 0
Guide sleeve,
Screw head Ø 12.5 mm
0708 080 029
Guide sleeve,
Screw head Ø 15 mm
0708 080 030
Guide sleeve,
Screw head Ø 20 mm
0708 080 031
Screw pouch
0691 800 200
Leather belt
0715 93 709
In the unlikely event of a failure or defect, have it
examined and repaired by a Würth master Service
Workshop. .
Always quote the article number as given on the
device name plate in any enquiries or spare parts
orders. The latest spare parts list for the device is
available online at http://www.wuerth.com/parts
-
manager. Alternatively, request a copy from your
closest Würth branch.
Warranty
This Würth appliance is covered by warranty
according to the applicable national regulations.
The warranty period begins on the date of purchase
(please retain invoice or delivery note as proof of
purchase). Any damage will be remedied by a
substitute delivery or by repair.
Damage caused by normal wear and tear, overload
or improper operation is not covered by warranty.
Complaints can only be recognised if the product is
returned, without dismantling, to a WÜRTH subsidi
-
ary, your WÜRTH sales representative or a service
centre authorised by WÜRTH for electrical tools.
