18
☞
Less than half of a full tooth should be visible
below the workpiece (see figure A).
Adjusting the Bevel-Angle (see Figure B)
The bevel angle can be adjusted between
0°
and
45°
.
– Loosen the locking screw
2
.
– Adjust the bevel-angle by tilting the machine toward
the base plate. The angle is indicated on the scale
19
.
– Tighten the locking screw
2
again.
Mounting/Adjusting
the Parallel Guide
❏
Before any work on the machine itself, remove
the battery.
Adjusting the Parallel Guide (see Figure C)
– Loosen the locking screw
1
and adjust the parallel
guide
11
to the requested clearance to the saw
blade.
– Tighten the locking screw
1
again.
Replacing/
Adjusting the Saw Blade
❏
Before any work on the machine itself, remove
the battery.
❏
Do not use abrasive wheels as the application
tool.
❏
Only use saw blades the maximum permitted
speed of which is equal or higher than the spec-
ified no-load speed.
Changing the Saw Blade
(see Figures D, E, F)
– Remove the Allen key
22
from the storage.
– Press the spindle lock button
14
.
– Loosen the fastening screw
24
with the Allen
key
22
. Remove the fastening screw
24
and the
clamping flange
23
.
Caution: The fastening screw 24 has a left-hand
thread!
– Pull back the retracting blade guard
12
with the
lever
9
.
– Change the saw blade
13
. The direction-of-rota-
tion arrow on the saw blade must correspond
with the arrow on the retracting blade guard
12
(see figure
F
).
– Mount the clamping flange
23
again and tighten
the fastening screw
24
.
Adjusting the Blade to the Perpendicular
Position (see figure G)
– Use a square to check that the blade is perpendic-
ular to the base plate.
– Should an adjustment be required, adjust the an-
gle via the adjusting screw
25
using the Allen
key
22
.
Dust/Chip Extraction
❏
Before any work on the machine itself, remove
the battery.
❏
Dusts from materials such as lead-containing
coatings, some wood types, minerals and metal
can be harmful to one’s health. Touching or
breathing-in the dusts can cause allergic reac-
tions and/or lead to respiratory infections of the
user or bystanders.
Certain dusts, such as oak or beech dust, are con-
sidered as carcinogenic, especially in connection
with wood-treatment additives (chromate, wood
preservative). Materials containing asbestos may
only be worked by specialists.
- Provide for good ventilation of the working
place.
- It is recommended to wear a P2 filter-class res-
pirator.
Observe the relevant regulations in your country
for the materials to be worked.
Sawdust Ejection
Clean the sawdust ejector
8
regularly. Use a suitable
tool (e. g. piece of wood, compressed air, etc.) to
clean clogged chip ejector.
☞
Keep fingers out of sawdust ejector 8.
External Dust Extraction
The sawdust ejector
8
fits to the connector with the
Art. No. 0702 400 042. For other diameters, an ex-
traction adapter must be used.
Initial Operation
Inserting the Battery
Slide the charged battery
7
in into the handle until it
can be felt to latch.
Switching On/Off
Switching on:
Push the lock-off button
4
down-
ward and hold.
Afterwards, press the On/Off
switch
5
.
Switching off:
Release the On/Off switch
5
.
☞
Do not switch the machine on or off while the
saw blade is in contact with the workpiece or
other materials.
HKS 28 A.book Seite 18 Dienstag, 26. Februar 2019 10:51 10
Summary of Contents for 0700 227
