Wulftec / M.J. Maillis Group
Page 7 of 36
Version 1.7.1 /November 2014
Safety
Read Carefully Before Operating
Any Wulftec Machinery
Wulftec stretch wrap machinery should be handled with the same caution and care as with any
other industrial equipment. Many automatic functions may be potentially hazardous. For this
reason, except for the authorized operator(s) and maintenance crew, other personnel should keep
clear at all times. It is especially important to be aware that mechanical or electrical components
may suddenly become active when the electrical panel is turned on.
Unstable loads being wrapped at high speeds are liable to fly apart and cause machine damage or
personal injury. For this reason, it is suggested that whenever attempting to wrap a "new" load
configuration, all personnel should be well clear of the wrapping area. The load
should not
be
wrapped at a higher speed than the machine was designed to handle.
Always assume the machine is in an active mode. Disconnect control power prior to servicing,
adjusting or performing routine maintenance procedures.
WARNING
!
Unless specifically stated, preceding all instructions in this manual, it must be well
understood that all inspection, maintenance, and repair should be performed only
when the electrical power is disconnected from the machine.
Please use extreme caution if it should become necessary to inspect, diagnose, or adjust the machine
while it is in operation. Only qualified individuals thoroughly familiar with the particular machine
should perform regular maintenance or inspections.
WARNING
! Disconnect machine power supply before loading film.
NOTE:
This mention (*) indicates that the item is in option on the system.
