Wuhan Huazhong Numerical Control HNC-18M, Operator'S Manual, Page: 81 / 119

HNC-18/19T Operator’s Manual
67
Create a new file
Usually, the user need to machine a new part. This request the user
to write the part program and type the code to the program memory.
And the program is different from the existed ones, so the user need
to create a new program file to store the new part program.
Sequence:
1) From the PRG submenus, press F2, corresponding to
EDIT, to enable the “NEW” submenu
2) Then Press F3, corresponding to NEW, to create a new
program file.
3) Give the new file’s name and type it in.
4) Confirm the name by “Enter” and edit the new file.
Press EDIT to bring out he
NEW function