Wuhan Huazhong Numerical Control HNC-18M, Operator'S Manual, Page: 42 / 119

2 Set up
28
c) Press PgUp or PgDw button on the alpha numerical keyboard to
browse the six WCS offsets (origin position of G54~G59) and RCS
offset.
d) Input the offset value on the command row. For example, if the
offset of G54 is 100 and 100, type in “X100 Z100”
e) Press Enter to confirm.
f ) The new origin position of the W.C.S will be displayed on the
screen
Type in the WCS value
for G54 at this area
The new origin
position take effect.