Wuhan Huazhong Numerical Control HNC-18M, Operator'S Manual, Page: 73 / 119

HNC-18/19T Operator’s Manual
59
3) After pressing the
B.P. LOAD
softkey, a table of
break point files is displayed. The first column is the
name of the file, the second is the size of the file in
Kilobytes and the last column is the date on which
the break point file was last saved.
4) Use the up/down keys to select the
desired break point file.
5) Press
Enter
to confirm your selection
6) If there were absolutely no changes since the B.P.
SAVE operation, press
Cycle Run
button to continue
the machining process. Otherwise switch to the
MDI
mode to recover the breakpoint
B.P. LOAD
softkey
Break point file
Size in Kilobytes
Date last saved