manualshive.com logo in svg

Wuhan Huazhong Numerical Control HNC-18M, Operator'S Manual, Page: 60 / 119

Share
Download
Wuhan Huazhong Numerical Control HNC-18M Operator'S Manual Download Page 60

3 MANUAL OPERATION 

 

46

 

Auxiliary Operation: 

  The five keys shown below control auxiliary 

operation.    The upper left key turns coolant flow on while the other 
two upper keys rotate the tool changer clockwise (

CW

) and 

counter-clockwise (

CCW

).    The bottom two keys control the chuck: 

the right key clamps the chuck and the left key selects the chuck.   

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

COOLANT ON/OFF:

    Press this key to start 

coolant flow. Coolant flow is ON if the LED light is 
lit and OFF if the LED light is off. 

Coolant key 

Tool key 

LUB key 

LUBRICATION ON:

    Turn on the lubrication 

system. 

TOOL LOCK/UNLOCK:   

Provided the tool is 

exchangeable, once this key is pressed, the 
tool will be release if it is locked before and will 
be locked if it is to be replaced in. 

Summary of Contents for HNC-18M
























































































































Reviews:

No comments