19
(1) Serial data line or USB data line: connect the instrument and the
computer serial port or USB interface, to ensure the stability of the connection.
(2)USB data line: install the USB driver program before use and detailed
installation steps, please refer to the "6, software instructions" “(10) USB driver
installation instructions ". To install the USB driver, need to re plug the USB
data cable.
6. Software instructions
(1) Run the software, as shown in figure 16
Figure 16 software interface
Note:
if the software is first run in Vista, Windows 7 or higher version of
the Windows system, please ensure that you have administrator privileges to
run the program (right click “HWS software.exe”, choose
“Run as
Administrator”); If the antivirus software prompts the file to be at risk, click
"allow the program to run".
(2) Use the serial data line or USB data cable to connect computers and
instruments. The instrument on, enter the communication interface, as shown
in figure 11.
(3) Click the "communication connection" button, the computer and the
