User Manual
11
↑
/
←
↓
/
→
L/R / U/D
-
Press
to switch between the X or Y coordinate
-
Press
or
to adjust the value of X or Y’s coordinate..
-
Press T to exit the spot analysis and return the real-time IR mode.
y
Press
to enter visual light/Infra Fusion mode
：
-
On the fusion mode, press
or
to adjust the proportion of fusion
-
On the fusion mode, press
to enter temperature fusion, the fusion range will be displayed at the bottom
Of LCD, press Trigger button and
to switch between the lowest temp and highest temp. Then
press
or
to adjust the temperature value.
-
On the fusion mode, press T to return the real-time IR mode. The proportion will be saved as the default value
when start up the fusion mode next time.
Laser On/Off
On the non-menu mode, keep
depressed for 2 seconds to turn on /off the laser (Ensure the Laser is “On” in the
menu of Parameter)
Manual calibration
On the non-menu mode, keep pressing "T" button and then press
button to run shutter calibration
Illuminator On/Off
On the non-menu mode, keep pressing
and
to enter the light illuminator function, press
to
turn on the light and increase the light intensity (total 3 levels), press
to decrease the light intensity till it is
turned off. Press
saves the settings and exit.
Press button T return to real-time IR mode
Dew-point Function
On the non-menu mode, keep pressing button
and
, the Dew-point value shows at the bottom of LCD,
press button T return to real-time IR mode
Summary of Contents for GUIDE EasIR-9
Page 25: ...User Manual 22 ...
