TetraCon
®
700-...Ex
Measurement / operation
ba77055e01
05/2014
11
4.2
Application-dependent settings
The TetraCon
®
700-...Ex conductivity measuring cell is long-term
stable. The conductivity measuring cell is immediately ready for opera-
tion for the authorized use in water/wastewater applications.
Adapting the cell
constant to the
installation location
In the case of special installation conditions, it may be necessary to
adapt the cell constant (due to the influence of the measuring environ-
ment, e.g. of boundary fields).
In chapter 6 W
HAT
TO
DO
IF
... of this operating manual you will find the
correct values to set for some products of the WTW accessory program
that require a correction of the cell constant (if it is possible to give fixed
values at all). If necessary, special installation recommendations for the
TetraCon
®
700-...Ex can be found in the accessory operating manual.
Details on how to determine and set the cell constant can
be taken from the operating manual of the measuring trans-
mitter.
Summary of Contents for TetraCon 700-...Ex Series
Page 17: ......
