SenTix
®
FET-D/B
Commissioning
27
3.3
Mounting the sensor
Warning
Do not touch the plug-in connector of the measuring tip. Electrostatic
charge can cause damage.
Mount the measuring tip and converter as follows:
Pull of the junction seal;
remove the protection cap. Do
not touch the plug-in
connector when doing so.
Make sure the O-ring seats
without being twisted.
Unscrew and remove the cap
nut from the converter.
Carefully insert the measuring
tip with the plug-in connector
in the converter. When doing
so make sure the marks on
the converter and the
measuring tip point towards
each other. Put the cap nut on
the sensor again and screw it
tight.
Junction seal
O-ring
Protection cap
Plug-in connector
