Commissioning
SenTix
®
FET-D/B
26
3
Commissioning
Scope of delivery
l
pH sensor SenTix
®
FET-D or SenTix
®
FET-B
l
1 light shield
l
2 batteries (CR 2032)
l
1 slotted screwdriver
l
1 operating manual
3.2
Inserting / exchanging the batteries
For commissioning, insert the 2 enclosed batteries in the converter as
follows:
The sensor must be switched
off.
Slightly lift the lug on the
converter enclosure and
carefully pull off the
enclosure.
Remove old batteries as
necessary.
Insert two new CR 2032
batteries (included in the
scope of delivery). The
positive poles must be on the
upper side when doing so.
Put the enclosure on the
converter again so that the lug
clicks into place.
