wtw pHotoFlex STD, Manual

Page: 49 / 80

pHotoFlex
®
STD Operation
49
ba75958e07 11/2020
 Connection to the PC
– Connecting cable AK 540/B (accessory, see chapter 8)
or
– LabStation LS Flex/430 (accessory, see
chapter 8
)
Establishing a
connection
4.7.2 Data transmission with the PC software LS Data
With the PC software LS Data you can transmit and save to the LS Data any
measurement- and calibration data for GLP compliant data management
(menu item
File / Save As...
/ *. csv (CSV format)) or transmit and save to Ex-
cel (menu item
Data exchange
/
Export (.xls)
) and thus transfer to LIMS.
4.7.3 Data transmission with the Excel add-in MultiLab
®
Importer
1 Connect the pHotoFlex
®
STD to the PC via the LabStation LS Flex/
430 (see operating manual LS Flex/430).
The connection to the PC is established. The data can be transferred
to the PC:
 via the PC software LS Data (see section 4.7.2)
 via the MultiLab
®
Importer (see section 4.7.3)
 via a terminal program (see section 4.7.6).
The PC software LS Data is available as an accessory (LabSta-
tion LS Flex/430 with PC software
LS Data
, see
chapter 8
).
1 Establish the connection to a PC (see operating manual of the PC
software LS Data and section 4.7.1).
2 Transmit data (see operating manual of the PC software LS Data).
Set the CSV output format for datasets at the pHotoFlex
®
STD. It
is selected in the menu,
Configuration
/
System
/
Interface
/
Out-
put format
(see section 4.7.4 E
STABLISHING THE CONNECTION TO A
PRINTER
).
1 Establish the connection to a PC (see section 4.7.1).
2 Establish a data connection (see operating manual
MultiLab
®
Importer).