wtw pHotoFlex STD Manual Download Page 9

Page: 9 / 80

pHotoFlex

STD

Overview

ba75958e07

11/2020

1.4

Socket field

1.5

LabStation (optional)

The LabStation, which is available as an accessory, enables you to use the
pHotoFlex

STD conveniently in the laboratory (see LabStation operating

manual).
Laboratory operation with the LabStation enables the following additional
functions:



With photometric measurements, the zero measurement is retained even
after switching the pHotoFlex

STD off and on again



You can connect a barcode reader for the simplified calling up of programs



The LSdata software included serves to easily enter user-defined pro-
grams



Operation with power pack and battery pack (included in the scope of de-
livery of the LabStation). The battery pack in the pHotoFlex

STD is auto-

matically charged as soon as the meter is placed in the LabStation.

1 Contacts for operation on the LabStation
2 RS232 (serial) interface

Summary of Contents for pHotoFlex STD
















































































Search results

Summary of Contents for pHotoFlex STD

Reviews:

Related manuals for pHotoFlex STD

Brands by name

Popular brands

wtw pHotoFlex STD, Manual

Search results

Summary of Contents for pHotoFlex STD

Reviews:

Related manuals for pHotoFlex STD

Brands by name

Popular brands