pH 3310
Operation
57
ba75802e02
12/2008
4.6
Transmitting data (USB interface)
4.6.1
Options for data transmission
Via the USB interface you can transmit data to a PC. The following
table shows which data are transmitted to the interface in which way:
Note
The following rule applies: With the exception of the menus, shortly
pressing the
<F2>
/
[USB output]
key generally outputs the display
contents to the interface (displayed measured values, measurement
datasets, calibration records).
Data
Control
Operation / description
Current
measured values
of all connected
sensors
Manual
z
With
<F2>
/
[USB output]
.
z
Simultaneously with every
manual storage process
(see section 4.5.1).
Automatic, at
intervals
z
With
<F2
_
>
/
[USB output]
.
Then you can set the
transmission interval.
z
Simultaneously with every
automatic storage process
(see section 4.5.2).
Stored measured
values
Manual
z
Displayed dataset with
<F2
_
>
/
[USB output]
after
calling up from the storage.
z
All datasets with the
Output to USB
function.
For details, see section 4.5.3.
Calibration records
Manual
z
Calibration record with
<F2
_
>
/
[USB output]
.
For details, see section 4.6.
Automatic
z
At the end of a calibration
procedure.
