pH 3310
Operation
17
ba75802e02
12/2008
4.2.2
Navigation
Measured value display
In the measured value display, you can
z
open the respective measuring menu with
<F1>
(short keystroke).
z
open the
Storage & config
menu with the sensor-independent
settings by pressing
<F1
_
>
(long keystroke, approx. 2 s on
<F1>
).
z
change the display in the selected measuring window
(e. g. pH
<−>
mV) by pressing
<M>
.
Menus and dialogs
The menus for settings and dialogs in procedures contain further
submenus. The selection is made with the
<
▲
><
▼
>
keys. The current
selection is displayed with a frame.
z
Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with
<ENTER>
.
Example:
z
Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with
<ENTER>
.
Subsequently, the setting can be changed with
<
▲
><
▼
>
and
<ENTER>
. Example:
General
Measurement
Interface
Clock
Service information
Reset
System
22.09.2008
08:00
Back
Language:
Deutsch
Beep
:
Off
Illumination
:
On
Contrast
:
50 %
Switchoff time
:
1 h
General
22.09.2008
08:00
Back
