wtw OxiTop C, Operating Manual

Page: 21 / 82

OxiTop
®
Control OC 100 Operating mode: BOD Standard / BOD Routine
ba31114e06 06/2012
21
In BOD Routine operating mode there is no  1... identifier in
the display, and the controller automatically returns to the entry
menu after starting the measuring head.
Start the next measuring head

(2).
Contact selection:
The number of the measuring
head is automatically
incremented.
The controller continues to work with the contact selection, i.e.
you can now start a sequence of measuring heads (parallel
sample process) without having to press any further keys by
holding the controller to the next measuring head to be started.
When all the measuring heads provided for this sample have
been started:
Confirm
Stop  start with <RUN/ENTER> .
The controller returns to the entry menu.
If no measuring head is started (e.g. because the controller was
not held to - or not close enough to - a measuring head):
The start was stopped.
Use <RUN/ENTER> - Continue

start to confirm
“Continue start” and hold the
controller to a measuring head
(see above).
Return to
entry level menu with
- Stop  start
If an attempt is made to start a measuring head that was already
started:
Displays

already used!
Use <RUN/ENTER> to confirm
- New  and hold the controller to
a free measuring head (see
above).
Return to entry level menu with
- Stop

start