Settings
Multi 9310
66
ba75937e03
12/2011
9.2
ORP measurement settings
9.2.1 Settings for ORP measurements
The settings are made in the menu for measuring settings of the ORP measure-
ment. To open the settings, display the required measured parameter in the
measured value display and press the
<ENTER>
key. After completing the set-
tings, switch to the measured value display with
<M>
.
Default settings are printed in
bold
.
9.3
D.O. measurement settings
9.3.1 Settings for D.O. sensors
(menu for measurement and calibration settings)
Settings
The settings are available in the menu for measurement and calibration set-
tings. To open the settings, display the required measured parameter in the
measured value display and press the
<ENTER>
key. After completing the set-
tings, switch to the measured value display with
<M>
.
Default settings are printed in
bold
.
3.
Confirm the setting with
<ENTER>
.
4.
Quit the menu with
<M>
.
Menu item
Possible setting
Description
mV resolution
0.1
1
Resolution of the mV display
Reset
-
Resets all sensor settings to the
delivery condition (see section
9.6.1 R
Menu item
Possible
setting
Description
Calibration
/
Cali-
bration record
-
Displays the calibration record of the
last calibration.
Calibration
/
Cali-
bration data stor-
age
/
Display
-
Displays the last calibration records
(max. 10)
Calibration
/
Calibration data
storage
/
Output
to RS232/USB
-
Outputs the calibration data storage to
the interface
Summary of Contents for Multi 9310
Page 101: ......
