wtw MIQ/T2020 PLUS, Operating Manual

Page: 15 / 38

IQ S
ENSOR
N
ET
MIQ/T2020 PLUS Operation
4 - 1
4 Operation
4.1 Introduction
The MIQ/T2020 PLUS terminal is a control unit for the IQ S
ENSOR
N
ET
.
The terminal can be used to:
l
Display measured values
l
Start calibration
l
Perform system and terminal settings
l
Display messages.
Note
To guarantee data safety within the IQ S
ENSOR
N
ET
, access to the
following functions is only possible from one terminal at the same time:
l
Opening the Settings menu
l
Starting calibration
l
Assigning sensors or output modules as substitutes.
If one of these functions is already active at another terminal, a note
appears on the display.