LF 170
Operation
95
ba54104e09
11/2010
4.5
Parameterization
4.5.1
Calling up the parameterization level
Call up the parameterization level from the operating level as follows:
Note
If an incorrect password is entered or after pressing the
<ESC>
key
during password entry, access to the parameterization is only possible
in view mode, i.e. settings can be viewed but not changed.
1
Press
<DOWN>
.
2
Press
<ENTER>
.
3
The menu for the password prompt
appears.
When delivered, no password
protection is set up. In this case
proceed to the next operating step
by pressing
<ENTER>
three times.
If password protection is set up,
the password must be entered in
order to change settings. Enter the
password as follows:
– Set the first (flashing) digit with
<UP><DOWN>
and confirm
with
<ENTER>
.
– Set the other two digits in the
same way.
4
After the last digit you reach the
starting point of the
parameterization level. From here
you can reach the settings with
<ENTER>
(see section 4.5.2).
C d
5 5
o
5
A
P
