LF 170
Operation
89
ba54104e09
11/2010
4.4.2
Configuration setting table
General operating
instructions
The starting point for the settings is the start display of the configuration
level (see section 4.4.1):
Operation:
z
All settings of the following setting table are run through step by
step.
z
Select the desired value from the selection in each case with
<UP><DOWN>
and confirm this with
<ENTER>
. After that you
reach the next setting.
z
Certain settings or choices are only available with specific
instrument variants or depend on other preceding configuration
settings. Settings that are not available will be skipped.
z
After running through all the settings you again reach the starting
point of the configuration level. From here change to the operating
level with
<M>
or
<ESC>
or go to the parameterization level with
<UP><DOWN>
.
z
In view mode you can change to the operating level from any point
with
<M>
.
Swap to the first setting with
<ENTER>
.
o
C
