MAIN FEATURES FOR THE COMPONENTS (Main Body)
1.
Drilling Roller
– To drive the Drilling Chuck with a maximum speed of 16,000 R.P.M.
2.
Pearl Clamp
– To mount up the Clamping Head in proper position.
3.
Mounting Handle
– To control the movement of Pearl Clamp for mount up or release the Pearl.
4.
Drilling Chuck
– To mount up the Ground Bit Insert in proper location.
5.
Bench Top
– Support the drilling machine on the worktable and minimize the vibration while
operating.
6.
Locking Screw
– For locking the Transfer Pan on the drilling machine.
7.
Location Pin
– To adjust the minimum length between the ends of two Ground Bit Inserts in order to
avoid collision when drilling.
8.
Rotary Belt
– To connect the Pulleys between the Driving Motor and the Drilling motor.
9.
Drilling Handle
– For control the movement of Drilling Motors to drill the Pearl.
10. Transfer Pan
– For storage and transporting drilled Pearls.
11. Round Head Bolts
– For fabricate the drilling machine on the worktable.
12. Rings
– For fabricate the drilling machine on the worktable.
13. Plastic Pad
– Supporting the drilling machine on worktable and absorbing vibration.
14. Nuts
– For fabricate the drilling machine on the worktable.
15. Chuck Key
– For locking the Ground Bit Inserts on the Drilling Chuck.