2
K
K
The solidifying grease adheres to the perforated galvanised tray, the thickness of the deposit increases as grease
continues to solidify.
Whilst the grease is captured, the cooler liquid exits via the outlet hole near the bottom of the tank and through
the outlet connection.
Regular removal of the grease tray will remove both the cake of grease and any floating fats and solids.
It is important to size the trap correctly since large effluent discharges can pass through the smaller trap, only
partially trapping the grease.
Delivery
The grease trap will be supplied in loose component form on a pallet and shall comprise the main body, 2 x
couplings, 1 x 90˚ bend, 1 x square hopper with horizontal back inlet, 1 x lid and frame and 1 x perforated
tray.
Each piece shall be carefully removed from the pallet and stored safely aside.
The pallet shall be returned to the supplier, recycled or safely disposed of.
Health and Safety
The appropriate safety equipment must be worn during installation including gloves and safety shoes suitable
for handling clay products.
Function
FLOW
Tray
FLOW
Effuent
Grease
Liquid
Outlet
Gully plug, must be fitted
at all times to ensure correct
functioning of the grease trap.
Grease Trap with Effluent Entering and Grey Water Discharge
