Original Operating Instructions
BATI0XXX-ES-1-ZZZ-1
Operation
O_BATI_0XXX-ES-1-ZZZ-1_V1.4_GB
Seite
39
von
60
4 Operation
WARNING!
Danger to life due to high voltage!
Risk of injury by disregarding the instructions for actions!
•
Read and observe all safety instructions and symbols on the
product and within the operating instructions.
•
No activities may be performed without authorization or
qualification.
4.1
Operating Modes
The operating modes and switching between them are carried out by external control
via the Ethernet interface. Controlling the product via the Ethernet interface is
described in the corresponding
Interface Description
.
Error monitoring is active in each operating state. If an error occurs, all functions of the
product are stopped automatically. An error message is available via the Modbus TCP-
interface. When the cause of the error is eliminated, the product must be reset via the
higher-level control to restart the operation.
4.2
Enable Switch
DANGER!
Danger to life due to high voltage!
Also after pressing the Enable switch dangerous voltages are present in
the product. Touching live parts can result in death or serious injury due
to electric shock.
•
Before working on the product, check that it is switched off and
safeguarded against reconnection.
•
After switching off the product, observe a minimum wait time of
at least 30 minutes prior to opening.
•
Check that no residual voltage is present within the DC link by
means of suitable testing equipment.
•
During operation, the doors of the product must remain closed.
•
No protection or security device may be temporarily or
permanently removed, altered or adjusted.
•
Provide earth connection before connecting to the AC/DC
power.
•
Observe all safety information from the battery manufacturer.
•
Observe that the AC/DC cables are still under voltage if they are
not disconnected from the product externally.
NOTICE: The red-marked areas are still under voltage
until the AC/DC cable are not
disconnected externally
). The blue-marked areas are the DC link.
Summary of Contents for BAT1200-ES-2-270-1
Page 60: ......
