CAUTION
: Arms and base can be damaged by hitting sharp edges on a desk.
Operating Instructions
STEP 1:
To Adjust Seat Height: While sitting in chair, reach under the right side of the chair to find the flat surface handle.
Lift the handle and raise your body off the chair to allow the chair to lift to your desired height. To lower the seat,
lift the handle while applying some of your body weight into the seat cushion. The chair will lower until the handle
is released or the chair reaches the bottom position.
STEP 2:
To Operate the Tilt Lockout: Reach under the right side of the chair to find the height adjustment handle. Slide (PULL)
the lever to the right, or outside direction. All the way out allows the chair to rock or tilt backwards. To lock the
chair in the upright or vertical position, sit up straight and push the lever in, or to the left.
STEP 3:
To Adjust Tension on the Tilt Mechanism: Reach under the front of the chair in the center for a round knob. Turn
the knob clockwise to increase the firmness (stiffer). Turn the knob counter clockwise to decrease the firmness
(softer).
STEP 1
STEP 2
STEP 3
