WS 5501 Series Manual Download Page 4

Page: 4 / 8

Place the 5-star base (B) upside down on a firm surface.

Insert one caster (A) into the socket of each of the five points on the base. When inserting the caster into the

5-star base apply a little pressure to the caster to pop it into position.

Turn the 5-star base right side up so the casters are on the floor.

Insert the large end of the gas lift (D) into the center hole in the 5-star base.

Place the telescoping cover (C) over the small end of the gas lift.

Summary of Contents for 5501 Series

Page 1: ... damaged DO NOT return to the store For immediate assistance with assembly or to order replacement parts please call 1 317 804 9160 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION PLEASE READ AND KEEP FOR FUTURE REFERENCE ...

Page 3: ...LAT WASHER x 8 ALLEN WRENCH x 1 ARM CAP x 4 Hardware pack contains one extra of each of the machine screws and washers CASTERS x 5 5 STAR BASE x 1 TELESCOPING COVER x 1 GAS LIFT x 1 SEAT PLATE x 1 LEFT ARM x 1 RIGHT ARM x 1 BACK CUSHION x 1 SEAT CUSHION x 1 PARTS IDENTIFICATION ...

Page 4: ...e base When inserting the caster into the 5 star base apply a little pressure to the caster to pop it into position Turn the 5 star base right side up so the casters are on the floor Insert the large end of the gas lift D into the center hole in the 5 star base Place the telescoping cover C over the small end of the gas lift ...

Page 5: ... firm surface with the padded side down exposing the underside of the seat Align the holes in the seat plate E with the threaded inserts in the bottom of the seat H Insert four 1 4 20 x 11 4 machine screws 1 four lock washers 3 and four flat washers 4 through the holes in the seat plate and into the seat Tighten securely with the allen wrench 6 Hardware used in Step 2 ...