4
Align the holes in the left arm (F) with the threaded insert in the back cushion (I) and the threaded insert in
the seat cushion (H).
Insert a
5
/
16
” x 2” machine screw (2) through the arm and into the threaded insert in the back cushion (I).
Insert a
5
/
16
” x 2” machine screw (2) through the arm and into the threaded insert in the seat cushion (H).
Tighten securely with the allen wrench (6).
Repeat for the right arm (G).
Securely tighten the
1
/
4
-20 x 1
1
/
4
” machine screws (1) installed in STEP 3 with the allen wrench (6).
Insert the arm caps (5) into the screw holes in each arm.
Place the completely assembled seat onto the gas lift by inserting the small exposed end of the gas lift (D)
into the hole in the seat plate (E). Sit in the chair to “seat” the gas lift into the seat plate.
Hardware used in Step 4
