WIM-HB-000_A
Page
5
of
21
2.1
Product Description
The WPT Power Hydrodynamic Brake is a device that absorbs power by converting mechanical energy into heat in
water. Follow the procedures detailed in this Installation and Maintenance Manual for years of service.
Customer supplied mounting supports must be used on all installations. Mounting holes are located on each side
of unit.
When ordering parts, use the part number from the Bill of Materials supplied with this unit. Also, please include
the part number and the serial number from the unit itself. These will be found on the brass tag. Your WPT Power
Distributor can provide a copy of the Bill of Materials if the one provided should become lost.
When performing installation and maintenance functions, refer to the drawings in this manual, page 6. The
references on the drawing in this manual MAY NOT correspond to the references on the assembly drawing and
Bill of Materials. Do not use the item numbers from the drawing in this manual for ordering parts.
