WPI UltraMicroPump II, Instruction Manual

Page: 15 / 32

UltraMicroPump II
World Precision instruments
13
UltraMicroPump II Operation
When the pump runs, a series of beeps indicates that the pump is running. At
the end of the program, the controller also beeps. A lamp on the back of the
ultramicroPump indicates a signal from the controller. As the pump runs, the
counter increments as an indication of the plunger’s motion. multiple injections can
be achieved by pressing the
run
/
stop
button again after the pump has stopped.
Fast forward
Press and hold the
right arrow
key then press
run
/
stop
. the syringe
pump will continue running as long as these two keys are depressed or until the
set volume is reached.
Fast reverse
Press and hold the
left arrow
key then press
run
/
stop
. the syringe
pump will continue running as long as these two keys are depressed or until the
set volume is reached..