SI-BF-100
World Precision Instruments
3
Warnings
CAUTION
: The optical input feeds light into the photomultiplier, which is an
extremely sensitive light measurement device. To avoid damage to the
photomultiplier, it is imperative that the probe be attached to the optical
input or that the input be capped when the
SI-BF-100
is powered on.
PHOTOMULTIPLIERS ARE EXPENSIVE TO REPLACE.
Parts List
After unpacking, verify that there is no visible damage to the system. Verify that all
items are included:
(1)
SI-BF-100 Biofl uorometer
(1) 12V Power adapter
(1) Species-specifi c probe (for example, calcium or ATPase)
(1)
M3301
Manual Manipulator
(1)
M10
Magnetic Stand
(1) Instruction Manual
Unpacking
Upon receipt of this instrument, make a thorough inspection of the contents and
check for possible damage. Missing cartons or obvious damage to cartons should be
noted on the delivery receipt before signing. Concealed damage should be reported
at once to the carrier and an inspection requested. Please read the section entitled
“Claims and Returns” on page 27 of this manual. Please contact WPI Customer Service
if any parts are missing at 941.371.1003 or [email protected].
Returns:
Do not return any goods to WPI without obtaining prior approval (RMA
# required) and instructions from WPI’s Returns Department. Goods returned
(unauthorized) by collect freight may be refused. If a return shipment is necessary,
use the original container, if possible. If the original container is not available, use a
suitable substitute that is rigid and of adequate size. Wrap the instrument in paper
or plastic surrounded with at least 100mm (four inches) of shock absorbing material.
For further details, please read the section entitled “Claims and Returns” on page
27 of this manual.
