4
World Precision Instruments
Fig. 3—(Left) The PV830 Startup kit includes tubing and several fittings.
Fig. 4—(Right) The threaded fitting is for a nitrogen regulator. Depress the plastic collar to
remove tubing.
Fig. 5—The PicoPump Pressure and Vacuum ports are located on the rear panel of the
PV830.
To install the hard tubing, push it into the port until the tubing engages and cannot
be pulled out. To remove tubing, press in on the plastic collar. Do not remove tubing
holders. These parts are intended to remain on the pump.