WPI MICRO-ePUMP, Instruction Manual

Page: 9 / 32

MICRO-ePUMP
World Precision Instruments 5
Rear Panel
Foot Switch Connection
USB Port (not used)
Power Supply Connection
Power Switch
Fig. 4—The foot switch connection, power supply connection and
power switch are located on the back panel of the MICRO-ePUMP.
Foot Switch Connection – Plug the connector from the foot
switch into the connection port marked with the foot switch icon.
Press the foot switch to initiate a timed sequence (timed mode)
or to manually eject pressure (manual mode). This foot switch is a
two-stage switch. Depress it half way down to engage the MICRO-
ePORE™ , and depress it fully to make an injection. (See “Foot
Switch” on page 6.)
USB Port –This interface is reserved for factory use only.
Power Switch –To power on the unit, press the toggle switch to
—. To power off the unit, press the toggle switch to O.
Power Supply Connection –Insert the power supply connector
into this port and plug the other end into an A/C wall outlet.