WPI INV-101, Install Manual

Page: 12 / 32

INV-101
8
WORLD PRECISION INSTRUMENTS
3. Tighten hex screws to secure the condenser assembly into the condenser mount ( Fig. 20 ).
Fig. 20 –Tighten hex screws on condenser head
4. Plug the lamp housing into the lamp connector ( Fig. 21 ).
Fig. 21 –Connect the lamp Fig. 22 –Lamp connected Fig. 23 –Install lamp
5. Lower the lamp housing onto the mounting pin sockets in the top of the condenser
head. ( Fig. 23 ). The assembled condenser and lamp housing is shown in Fig. 24 .
Fig. 24 –Assembled condenser with lamp housing